Distemper
Chemsol Chemwall AD
Chemsol Chemwall AD is a ready-to-use, water-dilutable distemper designed for interior wall applications. It provides a smooth, durable finish and can be tinted in desired shades for enhanced interior aesthetics.
Applications
- Interior walls
- Lobbies, parking areas, lift lobbies, and other interior spaces
Features
- Good binding to the substrate.
- Specifically designed for interior walls.
- Provides better hiding and smooth finish.
Method of Application
1. Surface Preparation
- Surface should be clean, dry, and in sound condition.
- All dirt, grease, and loose particles should be removed, and the surface should be washed thoroughly with clean water.
- All previous coatings, if any, shall be completely removed.
2. New Surfaces
- The newly constructed surfaces shall be completely cured before coating application.
3. Cracks and Joint Treatment
- All surface cracks from 0–5mm shall be opened using a 3mm angle grinder.
- The opened cracks shall be cleaned properly and filled with Chem Crack Fill (acrylic crack filler).
- Cracks more than 5mm should be repaired using polymer-modified mortar with Chemsol Chemfast SBR (cement:sand ratio 1:3, 10% polymer by weight of cement). Allow it to cure properly.
4. Application
- Ensure the surface is clean before primer application.
- Add 40% water to Chemprime IE (8L water to 20L primer) and apply one coat of primer on the surface.
- Allow the priming coat to dry for 3–4 hours before applying subsequent coats.
- Mix 30% water (6L water to 20Kg Chemwall AD), add the desired shade tinter, and mix thoroughly.
- Apply the first coat on the surface and allow it to dry completely.
- Apply the second coat over the first and let the system air cure.
Precautions and Limitations
- Do not dilute Chemwall AD beyond the recommended proportion.
- Keep the material closed when not in use.
Technical Information
| PROPERTIES | UNITS | RESULTS |
|---|---|---|
| Color | White | |
| Adhesion to Concrete | Excellent | |
| Surface Dry | Min | 45–55 |
| Finish | Smooth |
Theoretical Coverage
Material consumption of 8–10 m²/L for 2 coats, depending on the porosity and smoothness of the substrate.
Pack Size
1kg, 5kg, 10kg, and 20kg
Storage
Chemsol Chemwall AD shall be stored in a cool and dry place, protected from direct sunlight.
Shelf Life
12 months from the date of manufacturing if unopened and stored properly.
Health and Safety
- Wash skin with soap and water after contact.
- In case of eye contact, rinse immediately with water and consult a physician if irritation persists.
- If ingested, consult a doctor immediately.
End-to-End Surface Protection Expertise
At Chemsol, we provide complete protection solutions for industrial, commercial, and residential structures. From surface preparation to final finishing, we deliver chemistry-driven systems that extend life, boost durability, and ensure performance in the toughest environments.
Detailed site assessment to identify substrate condition, moisture issues.
Custom-formulated coatings and matched to your personal environment.
Mechanical, chemical, and cleaning processes to ensure perfect bonding.
Precision installation with certified applicators for seamless, durable, and aesthetic finishes.
End-to-end supervision, quality inspection, and post-project support for long-term performance.
Experience the Chemsol Difference
Chemsol
✅ End-to-end coating & waterproofing systems
✅ Custom polymer-engineered formulations
✅ Certified applicators & trained experts
✅ Scientific surface preparation & testing
✅ Long-term performance & maintenance support
Others
❌ Partial or single-stage solutions
❌ Generic off-the-shelf chemicals
❌ Unskilled labour & inconsistent quality
❌ Minimal prep, poor adhesion & failures
❌ No after-service or durability assurance